臥式不銹鋼管道離心泵 進口臥式不銹鋼管道離心泵 德國進口臥式不銹鋼管道離心泵Horizontal stainless steel pipeline centrifugal pump

臥式不銹鋼管道離心泵概述

臥式不銹鋼管道離心泵是在同類產品*技術的基礎上，德國巴赫通用離心泵之性能參數，自行研制開發的新一代節能、環保臥式離心泵。該系列泵性能優、可靠性高、壽命長、結構合理、 外形美觀，具有行業水平。臥式不銹鋼管道離心泵供輸送清水及物理化學性質類似于清水的其他液體之用，適用于工業和城市給排水、高層建筑增壓送水、園林噴灌、消防增壓、遠距離輸送、暖通制冷循環、浴室等冷暖水循環增壓及設備配套，使用溫度T＜80℃。

臥式不銹鋼管道離心泵工作條件
1、 吸入壓力≤1．6MPa，或泵系統zui高工作壓力 ≤1．6MPa，即泵吸入口壓力+泵揚程≤1．6MPa、泵靜壓試驗壓力為2．5MPa，訂貨時請注明系統工作壓力。泵系統工作壓力大于1．6MPa時應 在訂貨時另行提出，以便在制造時泵的過流部分和聯接部分采用鑄鋼材料。
2、環境溫度<40℃，相對濕度<95％。
3、所輸送介質中固體顆粒體積含量不超過單位體積的0．1％，粒度<0．2mm。
注：如使用介質為帶有細小顆粒，請?jiān)谟嗀洉r(shí)注明，以便廠家采用耐磨式機械密封。

臥式不銹鋼管道離心泵產品特點
臥式不銹鋼管道離心泵滴水不漏：不同材質的硬質合金密封，保證了不同介質輸送均無泄漏，噪音低：兩個低噪音軸承支撐下的水泵，運轉平穩，除電機微弱聲響，基本無噪音，故障率低：結構簡單合理，關鍵部分采用*品質配套，整機*工作時間大大提高，維修方便：更換密封、軸承，簡易方便。

Horizontal stainless steel pipeline centrifugal pump
The horizontal stainless steel pipeline centrifugal pump is a new generation of energy saving and environmental protection horizontal centrifugal pump, which is developed on the basis of the advanced technology of the same kind of products in the world, and the performance parameters of the German Bach general centrifugal pump. This series pump has the advantages of high performance, high reliability, long service life, reasonable structure and beautiful appearance. Horizontal stainless steel pipeline centrifugal pump for the transport of water and physical and chemical properties similar to water and other liquids used, suitable for the industry and the city water supply and drainage, water pressure high-rise buildings, garden sprinkler, fire booster, long-distance transportation, HVAC refrigeration cycle, bathroom pressurization of cold and hot water circulation equipment, the use of T temperature less than 80 degrees celsius.
Horizontal stainless steel pipeline centrifugal pump working conditions
1, suction pressure is less than 1.6MPa, or pump system maximum working pressure is less than 1.6MPa, the pump outlet pressure and pump head, pump hydrostatic test pressure is less than or equal to 1.6MPa inhalation of 2.5MPa, please specify when ordering the system working pressure. When the pump system working pressure is greater than 1.6MPa should be put in order, in order to make the pump when the flow part and the connection part of cast steel material.
2, ambient temperature <40 DEG C, relative humidity <95%.
3. The volume content of solid particles in the medium is not more than 0.1% of the volume, and the particle size is <0.2mm.
Note: such as the use of medium with small particles, please specify when ordering, so that manufacturers use wear-resistant mechanical seal.
Horizontal stainless steel pipeline centrifugal pump product features
Horizontal stainless steel pipeline centrifugal pump leak: hard alloy seal with different materials to ensure the transportation of different media without leakage, low noise, low noise bearing two support under the pump, smooth operation, in addition to motor weak sound, no noise, low failure rate, simple and reasonable structure, the key part of supporting the use of world-class quality. The working time is greatly improved, easy maintenance: replacement of seals, bearings, simple and convenient.

Sales Hotline:

Service