化工儀器網>產品展廳>生命科學儀器>神經生物學儀器>電生理設備>BT-CS,STIM-AT,HLD-CS cellmc,Cell MicroControls細胞電刺激培養腔裝置...
BT-CS,STIM-AT,HLD-CS cellmc,Cell MicroControls細胞電刺激培養腔裝置，細胞灌流電刺激腔室裝置系統
- 公司名稱 世聯博研（北京）科技有限公司
- 品牌
- 型號 BT-CS,STIM-AT,HLD-CS
- 產地 美國
- 廠商性質 代理商
- 更新時間 2017/6/6 8:48:51
- 訪問次數 2275
聯系方式：李勝亮13261877206 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
細胞應力加載儀,3細胞打印機,NanoTweezer新型激光光鑷系統,PicoTwist磁鑷,美國NeuroIndx品牌Kuiqpick單細胞捕獲切割系統
cellmc,Cell MicroControls細胞電刺激培養腔裝置，細胞灌流電刺激腔室裝置系統
n Low cost reusable culture/stim chamber (BT-CS)
-small volume, laminar flow, inflow/outflow port, #1 glass bottom
n Stimulation/thermistor assy (STIM-AT) presses into place-no tools required
n Holder (HLD-CS) for chamber, aspirator
n Microscope stage adapters (MSA-NIK, MSA-TS100, MSA-OL11, MSA-LEI/DM, MSA-MZ etc.) for all popular microscopes
n BT-CS fits Ionoptix Corp C-Dish for stimulation during culture
DESCRIPTION
The Culture Chamber system uses a low cost but complete cell perfusion chamber (BT-CS) for holding cells or small pieces of tissue and then transferring them to a microscopy or electrophysiology setup. The BT-CS has an inflow tube and area for aspirating solution and has laminar flow over a range of flow rates. The Stimulation/thermistor assy (STIM-AT) presses into the Chamber holder (HLD-CS). The unique design of the stimulation electodes is such that they clip into a small recess cut along the front and rear lower edges of the chamber. They can be rebent to their original shape if they are accidentally damaged. The aspirator is postioned with the FL-1 Miniature postioner attached to the HLD-CS.
In a typical setup with temperature control the HPRE2 Pre-heater is used for heating the chamber. perfusate The MPRE8 8 channel pre-heater can be used to superfuse a region of the chamber. These can both be controlled by the TC2BIP Temperature Controller for electrophysiology or mTCII micro-Temperature Controller for microscopy. If the TC2BIP is equiped with the third channel (TC2-Ch3) the temperature in the chamber can be monitored with the thermistor built into the Stimulation/thermistor assy.
The Chamber holder fits into the Microscope stage adapter. These are available for most popular microsopes (see our website for further information).
Specifications
BT-CS: Central chamber-volume 0.3ml
- 13x12mm
- aspiration port matches male Luer for priming
- supplied with #1 cover slide attached
- polycarbonate (autoclavable)
STIM-AT: Platinum Iridium stimulation wires, snaps into HLD-CS
HLD-CS: Holds BT-CS, STIM-AT and FL-1. Fits into MSA-XXX stage adapters
采購中心
化工儀器網