MAHLE瑪勒吸油過濾器
Suction filters protect the pump of a hydraulic system from rough contamination. They are either installed in front of the pump or - especially maintenance-friendly - accessible from the outside with the clogging indicator built into the suction line.
The broad selection of system-suitable elements permits protection of the system and pump in the fine range from 10 - 25 μm with Mic quality or in the rough range with cleanable wire mesh.
Suction Filter Pi 160
Suction Filter Pi 1710, nominal size up to 480
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒管路過濾器
Pressure filters are available as full- or partial-flow filters for the pressure ranges low-pressure to 25 （60） bar, medium pressure to 210 bar, high pressure to 450 bar. The housings are of robust, flow-friendly design; the filter elements are made from a broad selection of system-suitable components adapted precisely to meet the specific requirements.
New hydraulic filters in accordance with DIN 24 550 fulfil current market demands.
An extensive accessory programme completes our offering.
Low Pressure Filter Pi 1500, operating pressure 10 （25） bar, nominal size up to 600, according to DIN 24550
Low Pressure Filter Pi 1907, operating pressure 16 bar, nominal size 400 up to 6000
Low Pressure Filter Pi 1975, operating pressure 6 bar, nominal size 50
Low Pressure Filter Pi 220, operating pressure 10 bar, nominal size up to 160
Low Pressure Filter Pi 230, operating pressure 25 （63） bar, nominal size up to 800
Low Pressure Filter Pi 2300, operating pressure 25 （40） bar, nominal size up to 2000, according to DIN 24550
Low Pressure Filter Pi 270, operating pressure 10 bar, nominal size up to 315
Medium Pressure Filter Pi 3000, operating pressure 200 （315） bar, nominal size up to 400, according to DIN 24550
Medium Pressure Filter Pi 340, operating pressure 250 bar, nominal size up to 450
Medium Pressure Filter Pi 360, operating pressure 210 （315） bar, nominal size up to 300
High Pressure Filter Pi 4000, operating pressure 400 bar, nominal size up to 400, according to DIN 24550
High Pressure Filter Pi 410, operating pressure 315 bar, nominal size 20-63
High Pressure Filter Pi 420, operating pressure 400 bar, nominal size up to 450
Low Pressure Filter Pi 150, operating pressure 10 （25） bar, nominal size up to 630
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒雙聯過濾器
Since an interruption of production to change the filter element is usually not possible in continuous processes, MAHLE offers the ideal solution with its duplex filter series. Duplex filters with standard integrated clogging indicator work trouble-free around the clock and can be easily serviced or replaced without interruption of operations or switchover breaks.
Low Pressure Duplex Filter Pi 210, operating pressure 25 （63） bar, nominal size up to 450
Low Pressure Duplex Filter Pi 2100, operating pressure 25 （63） bar, nominal size up to 40, 100, 250 according to DIN 24550
Low Pressure Duplex Filter Pi 2100, operating pressure 25 bar, nominal size up to 630 and 1000, according to DIN 24550
Low Pressure Duplex Filter Pi 231
Low Pressure Duplex Filter Pi 5075, operating pressure 16 bar, nominal size 400 up to 6000
Medium Pressure Duplex Filter Pi 370, operating pressure 200 （250） bar, nominal size up to 450
Medium Pressure Duplex Filter Pi 3700, operating pressure 200 （250） bar, nominal size up to 400, according to DIN 24550
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒回油過濾器
Return-line filters collect all the dirt that is produced in the system and rinsed out of the hydraulic system. This prevents dangerous dirt circulation arising through the tank and pump. These filters are usually installed in a space-saving way directly in the hydraulic tank and so belong to the most widely used filters for machines.
Through the use of modern materials, such as plastic made of glass-fibre-reinforced polyamide as well as aluminium, MAHLE return filters are especially light. Practically all filtration degrees are possible.
Tank Top Return-line Filter Pi 500, nominal size 40 up to 100, according to DIN 24550
Tank Top Return-line Filter Pi 500, nominal size 160-1000, according to DIN 24550
Duplex Tank Top Return-line Filter Pi 510, nominal size 40 up to 1000, according to DIN 24550
Tank Top Return-line Filter Pi 530, nominal size 35 and 50
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒旁路過濾系統及濾油車
Partial-flow filters are used in stationary designs to filter large quantities of oil, which cannot be cleaned adequay or only very uneconomically with full-flow filters. Through the filter's own circuit, which is optimally adapted to it, outstanding oil cleanliness can be achieved even in very large systems. In design, partial-flow filters can be used very flexibly as flushing, filling or filtering units.
Filter Unit Pi 8100, flow rates 27 and 55 l/min
External Loop Filter
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒自清洗過濾器: 傳真 手機: ：廖
With their advantage of non-stop operation, MAHLE automatic filters have expanded into new areas of application in automatic purification and disposal systems. They include the regeneration of cooling lubricants, rolling, drawing, washing and similar fluids as well as the filtration of fuel and lubricants of large diesel engines in marine engineering and power plant engineering to name but a few.
Our continuous, further development of materials and manufacturing technologies guarantees economically and technically optimum products of the highest quality. MAHLE industrial filters are therefore the first choice for machine manufacturers as well as for their users.
Model: AF71L, AF71G, AF71H, AF72G, AF73G, AF73S, AF74S, AF93G, AF113G, AF133G, AF1334-parallel, AF153G, AF173G.
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒旋裝式過濾器
Spin-on cartridges are filter elements that are designed as a unit with a housing. Through their compact construction, maintenance-free handling and outstanding value for the money, spin-on cartridges are used with machines and in the stationary area as suction and low-pressure filters up to 25 bar.
Equipped with highly efficient Mic and Sm-x filter inserts, MAHLE spin-on cartridges achieve the same filtration rates in the multi-pass test following ISO 16889 as do standard hydraulic filter elements.
Spin-on Cartridges, operating pressure 10/16/25 bar, nominal size up to 160
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒油箱空氣過濾器
Air breather filters are used for contamination-free air supply to tanks. A co-ordinated modular design permits flexible adaptation to the specified operating conditions. MAHLE offers a large selection of system-suitable filter elements that are corrosion- and impact-resistant and can be supplied with a variety of connection possibilities.
Air Breather Filters Pi 0101 - Pi 0185
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒污染發訊器及過濾器附件
Filter elements are used economically only when their dirt-holding capacity is compley used. The time when the filter element is exhausted must be reliably shown even after the system is shut down, and display must be as free of disturbances as possible.
Filter housings with contamination indicators fulfil this condition and also simplify maintenance. MAHLE offers a proven, unique modular system of optical and electric contamination indicators and pressure switches for almost all fluid and breather filters.
Contamination Indicators
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯
MAHLE瑪勒油品檢測儀
The portable contamination measuring system PIC 9100 permits measurement of solid contaminants in hydraulic fluids in accordance with the standards ISO 4406 and NAS 1638.
A highly precise laser measurement system, an integrated suction pump and integrated tank permit measurements on practically all systems and machines. With the optionally available evaluation software, this equipment is an essential instrument for maintenance and service of fluid-technical systems.
Portable Contamination Measuring System Pic 9100, max. operating pressure 315 bar
德國馬勒|mahle瑪樂過濾,德國MAHLE過濾器.MAHLE濾芯,馬勒濾芯代理公司,東莞市騰達工業自動化設備有限公司,: 傳真: ,劉小燕