Herein, a study of the surface modification of zirconium by anodic oxidation is reported. The oxidation
process was carried out in a solution containing K2SiO3 and KOH. The anodization was conducted at
voltages of 100, 200 and 400 V. It was found that the morphology of the surface did not change during
the oxidation of the zirconium at 100 and 200 V. The application of 400 V resulted in the incorporation of
silicon into the formed oxide layer and a significant modification of the surface morphology. The obtained
coatings are typical of coating produced during an electrolytic plasma oxidation process and contain a
considerable amount of silicon. The anodic oxidation of zirconium leads to a significant improvement in
the corrosion resistance of the material in the presence of Ringer’s physiological solution.
提供商 |
阿美特克科學儀器部-普林斯頓及輸力強電化學 |
下載次數(shù) |
231次 |
資料大小 |
2.3MB |
資料類型 |
PDF 文件
|
資料圖片 |
-- |
瀏覽次數(shù) |
2776次 |
14
立即詢價
您提交后，專屬客服將第一時間為您服務(wù)