Designed to operate reliably in demanding conditions, the MagnePot 8150 series are available in three, five, and ten turn
models.
Designed to operate reliably in demanding conditions, the MagnePot 8150 series are available in three, five, and ten turn
models. Incorporating Hall effect non-contacting technology means they do not wear out, as in contacting devices, and
there is no degradation of the output signal over life, making them ideal for applications where minimal maintenance is
required.
The 8150 family features a bushing mount with a 7/8" diameter package and a minimum of 10 million shaft rotations. Servo
mount is also available. Optional models with sealed shafts and rear lids for protection from severe environments are also
possible. A supply voltage of 5 Vdc is required and the ratiometric output can go from 4% to 96% of the supply voltage.
Other output voltage options are also available. These sensors are operational from -40oC to 125oC.
Applications:
• Joystick controls
• Factory automation
• Medical device positioning
• Vision system position feedback
• Targeting systems
• Aircraft flight and panel controls
• Rotary position sensing
•Motion control feed
Features:
• Non-contact technology provides clean outputs without sliding contact noise
• Absolute position output through multiple turns
• ± 0.50% independent linearity (±0.25% is available)
• 10 million shaft rotations minimum life
• Ratiometric output
• 12 mA max current
• -40°C to +125°C operating temperature
• Lead-free
• RoHS 2 com
12