目錄:深圳市漢斯福特科技有限公司>>儀表>>變送器>> MP26 數字過程變送器
數字變送器,即把模擬量變換成數字量顯示,并按一定的比例輸出電流信號或電壓信號。MP26數字變送器的設計結合了過程容器中可靠稱重信息，操作簡單，設置方便，可與大部分應變式稱重傳感器連接使用，輸出4-20mA信號。
The MP 26 series of Digital Process Transmitters is designed to combine reliable weight information from process vessels with extremely easy operation and setup.
A wide range of strain gauge load cells can be connected and output is provided in the common 4… 20 mA signal format. Direct access to all configuration and operation levels via the front keys. The MP 26/10 engineering tool provides the same level of access via a comfortable PC-Program.
得益于導軌設計，MP26可安裝在控制柜中，多個儀表排成一排，外觀緊湊，節(jié)省空間。輸入回路和模擬輸出的電流隔離使得MP26的集成操作簡單安全。
The Sartorius MP26 transmitter is designed for the use in typical control cabinets on convenient DIN rails. Multiple instruments can be easily ligned up in the cabinet. The very slim housing concept safes space. The full galvanical isolation of input circuit and the analogue output from the supply make the instrument especially easy and safe to integrate.
通過前端接口和選配的PC工具可輕松簡單采集稱重值，通過內置的調零功能改變恒載值。MP26集合了輸入控制電路和限位/報警功能，并配備即插即用的螺旋線端子，方便安裝和更換。
The direct-access front end interface and the optional PC-Tool MP 26/10 make the instrument ideal for all applications where ease of use and a simple but effective data acquisition of weight values is required.
The built-in Zero-set function allows for simple adaptation of Zero to changing dead loads.The MP26 standard input control circuit and the limit | alarm function can be combined and provide in conjunction with the builtin relay simple direct process control. The Transmitter is equipped with plug-gable screw terminals. This Terminals allow an easy installation and exchange of Instruments
內置感應放大器支持4或者6線稱重傳感器，并保證長距離連接下不犧牲精度。
The Sense-amplifier supports 4 and also 6 wire Load Cells. This allows connections over long distances without losing accuracy.
輸入電路控制
Continuous control of input circuit and input signal range.
調零功能
To suppress changing dead loads via the front keys or an external switch.
輸入信號過濾
Intelligent first order low pass filter to suppress unwanted signal deviation caused by external disturbances. Adjustable time constant and tolerance band. Signal changes that exceed the set tolerance bａnd will by-pass the filter directly for speedy response.
全數字信號處理，分辨率 20,000 d
0/4 - 20 mA或0/2 - 10 V輸出
防護等級IP20
Load cell supply 10 VDC, max. 4 Load cells a 350 O 4- or 6-wire connection Resolution: 20.000 Div. Not W&M approved Measuring time : 50 ms Sensor circuit fully galvanically isolated from input and supply. Display The two line LCD Display allow the indication of the weight an the full operation of the instrument. One LED and four further Display elements inform about the system status ａnd error messages. Analogue output 0/4… 20 mA, 0/2...10 V configurable internal Resolution: 14 bit, useable stepwith 1.5 μA Impedanze 600 O | 2 KO max. Digital In- | Outputs Relais, Function configurable 1 + IN, 5 V, 0.5 mA 2 + OUT, 250 V, 2 A | In- | Output All I | O circuits fully galvanically isolated from sensor input and supply.. Power supply Version MP 26/00 Voltage: 90...260 V AC 11.5 VA Version MP 26/01 Voltage 18-30 V AC/DC 8.5 VA/5.8 W Environmental conditions Temperature Operation: -10… +55 °C Storage: -30… +70 °C Humidity: 90 % RH Protection class Housing | connectors IP20 Mounting: 35 mm DIN rail (DIN46277) Electrical connections All electrical connections via modular screw terminals for 2.5 mm2 max. Dimensions 99 + 117.5 + 22.5 mm Weight 0.200 kg netto |
MP 26/00 Digital Process Transmitter 230 V 9408 800 26001
MP 26/01 Digital Process Transmitter 24 V 9408 800 26011
MP 26/10 Configuration Software incl. connection cable 9408 800 26101
相關型號
MP 20
MP 30
MP 80
MP 90
3
化工儀器網