化工儀器網
資料下載
上海騰拔質構儀用于測定草莓的彈性模量
閱讀：1161 發布時間：2022-9-21| 提 供 商 | 上海騰拔儀器科技有限公司 | 資料大小 | 5MB |
|---|---|---|---|
| 資料圖片 | 下載次數 | 26次 | |
| 資料類型 | PDF 文件 | 瀏覽次數 | 1161次 |
| 免費下載 | 點擊下載 |
Abstract
In this study, the textural mechanics of strawberry tissues were analyzed using a uniaxial compression test at six temperature levels, and a dynamic finite element model of the strawberry drop system was developed to investigate the collision-damage sensitivity of the fruit. The strawberry geometric model included two parts of the receptacle: the cortex and the pith. The fruit finite element model with average tissue mechanical data was found to be capable of reproducing four key collision mechanical parameters (maximum impact force and contact area, drop damage area, percentage of damage volume) with an average relative error of 1.76%, 8.45%, 2.99% and 4.74%, respectively. Five covariance analysis models also showed that the drop direction was the most important factor affecting the occurrence of the fruit drop damage, followed by fruit temperature and drop height. Specifically, in a low temperature range (1 ~ 7 ?C), the fruit collision damage degree did not change significantly with temperature change, but when the temperature was between 14 ?C and 35 ?C, the damage area and percentage of damage volume increased by 0.82 mm2 and 0.06%, respectively, for every 1 ?C increase in temperature. Furthermore, it was found that there is a strong linear correlation between internal and surface damage in the strawberry fruit, and the obtained mathematical models can be utilized to predict the internal damage degree of fruit based on the surface damage area. This study incorporated dynamic finite element technology with statistical analysis to provide a systematic approach for investigating the collision-damage sensitivity of fresh fruit in relation to fruit temperature.