您好, 歡迎來到化工儀器網！ 登錄| 免費注冊| 產品展廳| 收藏商鋪|
您好, 歡迎來到化工儀器網！ 登錄| 免費注冊| 產品展廳| 收藏商鋪|
13611866804
| 編號 |
| 中文名稱 | 英文名稱 | |
| GB 5370-85 | 防污漆樣板淺海浸泡試驗方法 | Method for testing antifouling panels in shallow submergence |
| GB/T 18590-2001 | 金屬和合金的腐蝕點蝕評定方法 | Corrosion of metals and alloys--Evaluation of pitting corrosion |
| GB/T 1554-1995 | 硅晶體完整性化學擇優腐蝕檢驗方法 | Test method for crystallographic perfection of silicon by preferential etch techniques |
| GB/T 10125-1997 | 人造氣氛腐蝕試驗鹽霧試驗 | Corrosion tests in artificial atmospheres--Salt spray tests |
| GB/T 10119-1988 | 黃銅耐脫鋅腐蝕性能的測定 | Copper-zinc alloys--Determination of dezincification corrosion resistance |
| DL/T 5358-2006 | 水電水利工程金屬結構設備防腐蝕技術規程 | Technical code for anticorrosion of metal structures in hydroelectric and hydraulic engineering |
| DL/T 693-1999 | 煙囪混凝土耐酸防腐蝕涂料 | () |
| GB 17915-1999 | 腐蝕性商品儲藏養護技術條件 | Specifications for storage and preservationof corrosive goods |
| GB 19521.6-2004 | 腐蝕性危險貨物危險特性檢驗安全規范 | Safety code for inspection of hazardous properties for dangerous goods of corrosive substances |
| GB 20588-2006 | 化學品分類、警示標簽和警示性說明安全規范 金屬腐蝕物 | Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Corrosive to metals |
| GB 20593-2006 | 化學品分類、警示標簽和警示性說明安全規范皮膚腐蝕/刺激 | Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Skin corrosion/irritation |
| GB 5085.1-2007 | 危險廢物鑒別標準 腐蝕性鑒別 | () |
| GB/T 10123-2001 | 金屬和合金的腐蝕基本術語和定義 | Corrosion of metals and alloys--Basicterms and definitions |
| GB/T 10127-2002 | 不銹鋼三氯化鐵縫隙腐蝕試驗方法 | Ferric chloride crevice corrosion test of stainless steels |
| GB/T 10582-1989 | 測定因絕緣材料而引起的電解腐蝕的試驗方法 | Test methods for determining electrolytic corrosion with insulating materials |
| GB/T 11112-1989 | 有色金屬大氣腐蝕試驗方法 | Non-ferrous metals atmospheric corrosion testing method |
| GB/T 11138-1994 | 工業芳烴銅片腐蝕試驗法 | Industrial aromatic hydrocarbons--Test method of copper corrosion |
| GB/T 11297.6-1989 | 銻化銦單晶位錯蝕坑的腐蝕顯示及測量方法 | Standard method for showing andmeasuring dislocation etch pits in indium antimonide single crystal |
| GB/T 11377-2005 | 金屬和其它無機覆蓋層儲存條件下腐蝕試驗的一般規則 | Metallic and other non-organic coating -- General rules for corrosion tests applicable for storage conditions |
| GB/T 12466-1990 | 船舶及海洋工程腐蝕與防護術語 | Terminology for corrosion and protection for ship and marine engineering |
| GB/T 13452.4-1992 | 色漆和清漆鋼鐵表面上的絲狀腐蝕試驗 | Paints and varnishes--Filiform corrosion test on steel |
| GB/T 13671-1992 | 不銹鋼縫隙腐蝕電化學試驗方法 | Stainless steels--Method of electrochemical test for crevice corrosion |
| GB/T 14092.5-1993 | 機械產品環境條件工業腐蝕 | Environmental condition for machinery products--Industrial corrosion |
| GB/T 14093.4-1993 | 機械產品環境技術要求工業腐蝕環境用 | Environmental technical requirements of machinery products for the industrial corrosion environments |
| GB/T 14142-1993 | 硅外延層晶體完整性檢查方法腐蝕法 | Test method for crystallographic perfection of epit-axial layers in silicon by etching techniques |
| GB/T 14293-1998 | 人造氣氛腐蝕試驗一般要求 | Corrosion tests in artificial atmospheres--General requirement |
| GB/T 14834-1993 | 硫化橡膠與金屬粘附性及對金屬腐蝕作用的測定 | Rubber，vulcanized--Determination of adhesion to，and corrosion of metals |
| GB/T 15260-1994 | 鎳基合金晶間腐蝕試驗方法 | Nickel-based alloys--Determination of resistance to intergranular corrosion |
| GB/T 15333-1994 | 絕緣用膠粘帶電腐蝕試驗方法 | Test method for electrolysis corrosion of electrical insulating adhesive tapes |
| GB/T 15555.12-1995 | 固體廢物腐蝕性測定玻璃電極法 | Solid waste--Glass electrode test--Method of corrosivity |
| GB/T 15748-1995 | 船用金屬材料電偶腐蝕試驗方法 | The method of galvanic corrosion test formetallic ship materials |
| GB/T 15957-1995 | 大氣環境腐蝕性分類 | Corrosivity classification of atmospheric environment |
| GB/T 15970.1-1995 | 金屬和合金的腐蝕應力腐蝕試驗第1部分:試驗方法總則 | Corrosion of metals and alloys--Stress corrosion testing--Part 1:General guidance on testing procedures |
| GB/T 15970.2-2000 | 金屬和合金的腐蝕應力腐蝕試驗第2部分:彎梁試樣的制備和應用 | Corrosionof metals and alloys--Stress corrosion testing--Part 2:Preparation and use of bent-beam specimens |
| GB/T 15970.3-1995 | 金屬和合金的腐蝕應力腐蝕試驗第3部分:U型彎曲試樣的制備和應用 | Corrosion of metals and alloys--Stress corrosion testing--Part 3:Preparation and use of U-bend specimens |
| GB/T 15970.4-2000 | 金屬和合金的腐蝕應力腐蝕試驗第4部分:單軸加載拉伸試樣的制備和應用 | Corrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens |
| GB/T 15970.5-1998 | 金屬和合金的腐蝕應力腐蝕試驗第5部分:C型環試樣的制備和應用 | Corrosion of metals and alloys--Stress corrosion testing--Part 5:Preparation and useof C-ring specimens |
| GB/T 15970.6-2007 | 金屬和合金的腐蝕 應力腐蝕試驗 第6部分：恒載荷或恒位移下的預裂紋試樣的制備和應用 | () |
| GB/T 15970.7-2000 | 金屬和合金的腐蝕應力腐蝕試驗第7部分:慢應變速率試驗 | Corrosion of metals and alloys--Stress corrosion testing--Part 7:Slow strain rate testing |
| GB/T 15970.8-2005 | 金屬和合金的腐蝕應力腐蝕試驗第8部分:焊接試樣的制備和應用 | Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments |
| GB/T 15970.9-2007 | 金屬和合金的腐蝕 應力腐蝕試驗 第9部分：漸增式載荷或漸增式位移下的預裂紋試樣的制備和應用 | () |
| GB/T 16266-1996 | 包裝材料試驗方法接觸腐蝕 | Test of packaging materials--Contact corrosivity |
| GB/T 16545-1996 | 金屬和合金的腐蝕腐蝕試樣上腐蝕產物的清除 | Corrosion of metals and alloys--Removal of corrosion products from corrosion test specimens |
| GB/T 17214.4-2005 | 工業過程測量和控制裝置的工作條件第4部分：腐蝕和侵蝕影響 | Operating conditions for industrial-process measurement and control equipment Part 4:Corrosive and erosive influences |
| GB/T 17506-1998 | 船舶黑色金屬腐蝕層的電子探針分析方法 | The method of electron probe microanalysis as corrosive layer on ferrous metals of ship |
| GB/T 17897-1999 | 不銹鋼三氯化鐵點腐蝕試驗方法 | Test of pitting corrosion resistance of stainless steels in the ferric chloride solution |
| GB/T 18593-2001 | 熔融結合環氧粉末涂料的防腐蝕涂裝 | Anti-corrosive painting of fusion bonded epoxy coating powders |
| GB/T 18749-2002 | 耐化學腐蝕陶瓷塔填料技術條件 | Standard specification for chemical--Resistant ceramic tower packings |
| GB/T 18912-2002 | 光伏組件鹽霧腐蝕試驗 | Salt mist corrosion testing of photovoltaic(PV)modules |
| GB/T 18982-2003 | 集裝箱用耐腐蝕鋼板及鋼帶 | Corrosion resistant steel plates and strips for con-tainer |
| GB/T 19285-2003 | 埋地鋼質管道腐蝕防護工程檢驗 | Inspection of corrosion protection for buried steel pipelines |
| GB/T 19291-2003 | 金屬和合金的腐蝕腐蝕試驗一般原則 | Corrosion of metals and alloys--General principles for corrosion testing |
| GB/T 19292.1-2003 | 金屬和合金的腐蝕大氣腐蝕性分類 | Corrosion of metals and alloys--Corrosivity of atmospheres--Classification |
| GB/T 19292.2-2003 | 金屬和合金的腐蝕大氣腐蝕性腐蝕等級的指導值 | Corrosion of metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories |
| GB/T 19292.3-2003 | 金屬和合金的腐蝕大氣腐蝕性污染物的測量 | Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution |
| GB/T 19292.4-2003 | 金屬和合金的腐蝕大氣腐蝕性用于評估腐蝕性的標準試樣的腐蝕速率的測定 | Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| GB/T 19353-2003 | 搪玻璃釉密閉系統中的腐蝕試驗 | Vitreous and porcelain enamels--Corrosion tests in closed systems |
| GB/T 19355-2003 | 鋼鐵結構耐腐蝕防護鋅和鋁覆蓋層指南 | Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines |
| GB/T 1970-1996 | 多孔陶瓷耐酸、堿腐蝕性能試驗方法 | Test method for acid and alkaline-resistance of porous ceramic |
| GB/T 19745-2005 | 人造低濃度污染氣氛中的腐蝕試驗 | Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es) |
| GB/T 19746-2005 | 金屬和合金的腐蝕鹽溶液周浸試驗 | Corrosion of metals and alloys-Alternate immersion test in salt solution |
| GB/T 19747-2005 | 金屬和合金的腐蝕雙金屬室外暴露腐蝕試驗 | Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests |
| GB/T 20120.1-2006 | 金屬和合金的腐蝕腐蝕疲勞試驗第1部分：循環失效試驗 | Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing |
| GB/T 20120.2-2006 | 金屬和合金的腐蝕腐蝕疲勞試驗第2部分：預裂紋試驗裂紋擴展試驗 | Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens |
| GB/T 20121-2006 | 金屬和合金的腐蝕人造氣氛的腐蝕試驗間歇鹽霧下的室外加速試驗（瘡痂試驗） | Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) |
| GB/T 20122-2006 | 金屬和合金的腐蝕滴落蒸發試驗的應力腐蝕開裂評價 | Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test |
| GB/T 20852-2007 | 金屬和合金的腐蝕 大氣腐蝕防護方法的選擇導則 | () |
| GB/T 20853-2007 | 金屬和合金的腐蝕 人造大氣中的腐蝕 暴露于間歇噴灑鹽溶液和潮濕循環受控條件下的加速腐蝕試驗 | () |
| GB/T 20854-2007 | 金屬和合金的腐蝕 循環暴露在鹽霧、“干"和“濕"條件下的加速試驗 | () |
| GB/T 2423.51-2000 | 電工電子產品環境試驗第2部分:試驗方法試驗Ke:流動混合氣體腐蝕試驗 | Environmental testing for electric and electronic products--Part 2:Test methods--Test Ke:Flowing mixed gas corrosion test |
| GB/T 2424.10-1993 | 電工電子產品基本環境試驗規程大氣腐蝕加速試驗的通用導則 | Basic environmental testing procedures for electric and electronic products--General guidanceof accelerated testing for atmospheric corrosion |
| GB/T 2951.10-1997 | 電纜絕緣和護套材料的通用試驗方法第5部分:填充膏專用試驗方法第1節:滴點----油分離----低溫脆性----總酸值 | Common test methods for insulating and sheathing materials of electric cables--Part 5:Methods specific to filling compounds--Section one:Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive components--Per |
| GB/T 3810.13-2006 | 陶瓷磚試驗方法第13部分:耐化學腐蝕性的測定 | Test methods of ceramic tiles Part 13: Determination of chemical resistance |
| GB/T 391-1977 | 發動機潤滑油腐蝕度測定法 | Determination of corrosion of engine lubricating oils |
| GB/T 4061-1983 | 硅多晶斷面夾層化學腐蝕檢驗方法 | Polycrystalline silicon--Examination method--Assessment of sandwiches on cross-section by chemical corrosion |
| GB/T 4334.2-2000 | 不銹鋼硫酸-硫酸鐵腐蝕試驗方法 | Method of ferric sulfate-sulfuric acid test for stainless steels |
| GB/T 4334.3-2000 | 不銹鋼65%硝酸腐蝕試驗方法 | Method of 65 percent nitric acid test for stainless steels |
| GB/T 4334.4-2000 | 不銹鋼硝酸-氫氟酸腐蝕試驗方法 | Method of nitric-hydrofluoric acid test for stainless steels |
| GB/T 4334.5-2000 | 不銹鋼硫酸-硫酸銅腐蝕試驗方法 | Method of copper sulfate-sulfuric acid test for stainless steels |
| GB/T 4334.6-2000 | 不銹鋼5%硫酸腐蝕試驗方法 | Method of 5 percent sulfuric acid test for stainless steels |
| GB/T 5003-1999 | 日用陶瓷器釉面耐化學腐蝕性的測定 | Checking and measuring to the chemical corroding resistance of glazes of domestic ceramics |
| GB/T 5018-1985 | 潤滑脂防腐蝕性試驗法 | Standard test method for corrosion preventive properties of lubricating greases |
| GB/T 5096-1985 | 石油產品銅片腐蝕試驗法 | Petroleum products--Corrosiveness to copper--Copper strip test |
| GB/T 5170.11-1996 | 電工電子產品環境試驗設備基本參數檢定方法腐蝕氣體試驗設備 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments |
| GB/T 5252-2006 | 鍺單晶位錯腐蝕坑密度測量方法 | Germanium monocrystal - inspection of dislocation etch pit density |
| GB/T 5776-2005 | 金屬和合金的腐蝕金屬和合金在表層海水中暴露和評定的導則 | Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water |
| GB/T 6384-1986 | 船舶及海洋工程用金屬材料在天然環境中的海水腐蝕試驗方法 | The testing methods for seawater corrosion in natural environment of metallic materials forship and offshore structures |
| GB/T 6461-2002 | 金屬基體上金屬和其他無機覆蓋層經腐蝕試驗后的試樣和試件的評級 | Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests |
| GB/T 6464-1997 | 金屬及其覆蓋層大氣腐蝕試驗現場試驗的一般要求 | Metals and its coatings--Atmospheric corrosion testing--General requirements for field tests |
| GB/T 6465-1986 | 金屬和其他無機覆蓋層腐蝕膏腐蝕試驗 (CORR試驗) | Metallic and other non-organic coatings--Corrodkote corrosion test(CORR test) |
| GB/T 6466-1986 | 電沉積鉻層電解腐蝕試驗(EC試驗) | Electrodeposited chromium coatings--Electrolytic corrosion testing (EC test) |
| GB/T 7326-1987 | 潤滑脂銅片腐蝕試驗法 | Lubricating grease--Corrosiveness to copper--Copper strip test |
| GB/T 7631.6-1989 | 潤滑劑和有關產品(L類)的分類第6 部分:R組 (暫時保護防腐蝕) | Lubricants and related products (class L)--Classification--Part 6:Family R (Temporary protection against corrosion) |
| GB/T 7733-1987 | 金屬旋轉彎曲腐蝕疲勞試驗方法 | Metals-rotating bar bending corrosion fatigue testing |
| GB/T 7988-2002 | 搪玻璃釉耐熱氫氧化鈉溶液腐蝕性能的測定 | Vitreous and porcelain enamels--Determination of resistance to hot sodium hydroxide |
| GB/T 7989-2003 | 搪玻璃釉耐沸騰鹽酸蒸氣腐蝕性能的測定 | Vitreous and porcelain enamels--Determination of resistance to condensing hydrochloric acid vapour |
| GB/T 7993-2003 | 用在腐蝕條件下的搪玻璃設備的高電壓試驗方法 | Vitreous and porcelain enamel--Enamelled articles for service under highly corrosive conditions--High voltage test |
| GB/T 7998-2005 | 鋁合金晶間腐蝕測定方法 | Test method for intergranular corrosion of aluminium alloy |
| GB/T 8034-1987 | 焦化苯類產品銅片腐蝕的測定方法 | Benzol products of coal carbonization--Corrosiveness to copper--Copper strip test |
| GB/T 9789-1988 | 金屬和其他非有機覆蓋層通常凝露條件下的二氧化硫腐蝕試驗 | Metallic and other non-organic coatings--Sulfur dioxide test with general condensation of moisture |
| HD 22.13 S1-1996+A1-2000 | 額定電壓450/750V及以下的橡膠絕緣電纜 第13部分：煙霧和腐蝕性氣體低排放的絕緣和交聯聚合物單芯和多芯軟 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases |
| HD 22.9 S2-1995+A1-1999 | 額定電壓450/750V及以下的橡膠絕緣電纜 第9部分：煙霧和腐蝕性氣體低排放的固定配線用單芯非鎧裝電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases |
| HG/T 2377-1992 | 搪玻璃層耐沸騰水腐蝕性能的測定 | () |
| HG/T 3172-2002 | 尿素高壓設備制造檢驗方法尿素級超低碳鉻鎳鉬奧氏體不銹鋼晶間腐蝕傾向試驗的試樣制取 | () |
| HG/T 3173-2002 | 尿素高壓設備制造檢驗方法尿素級超低碳鉻鎳鉬奧氏體不銹鋼晶間腐蝕傾向試驗 | () |
| HG/T 3174-2002 | 尿素高壓設備制造檢驗方法 尿素級超低碳鉻鎳鉬奧氏體 不銹鋼的選擇性腐蝕檢查和金相檢查 | () |
| HG/T 3178-2002 | 尿素高壓設備耐腐蝕不銹鋼管子—管板的焊接工藝評定和焊工技能評定 | () |
| HG/T 3523-1983 | 冷卻水化學處理標準腐蝕試片技術條件 | () |
| HG/T 3530-2003 | 工業循環冷卻水污垢和腐蝕產物試樣的調查、采取和制備 | () |
| HG/T 3531-2003 | 工業循環冷卻水污垢和腐蝕產物中水分含量的測定 | () |
| HG/T 3532-2003 | 工業循環冷卻水污垢和腐蝕產物中硫化亞鐵含量的測定 | () |
| HG/T 3533-2003 | 工業循環冷卻水污垢和腐蝕產物中灼燒失重測定方法 | () |
| HG/T 3534-2003 | 工業循環冷卻水污垢和腐蝕產物中酸不溶物、磷、鐵、鋁、鈣、鎂、鋅、銅含量測定方法 | () |
| HG/T 3535-2003 | 工業循環冷卻水污垢和腐蝕產物中硫酸鹽含量測定方法 | () |
| HG/T 3536-2003 | 工業循環冷卻水污垢和腐蝕產物中二氧化碳含量的測定方法 | () |
| HG/T 3983-2007 | 耐化學腐蝕現場纏繞玻璃鋼大型容器 | Filament wound glass-fiber reinforced thermosetting resin chemical resistant large tanks made on site |
| HG/T 3984-2007 | 耐化學腐蝕改性聚丙烯儲槽 | Modified chemical resistant polypropylene tank |
| HGJ 229-1991 | 工業設備、管道防腐蝕工程施工及驗收規范 | () |
| JB/T 10579-2006 | 腐蝕數據統計分析標準方法 | () |
| JB/T 10696.5-2007 | 電線電纜機械和理化性能試驗方法 第5部分：腐蝕擴展試驗 | () |
| JB/T 3206-1999 | 防銹油脂加速凝露 腐蝕試驗方法 | () |
| JB/T 4375-1999 | 電工產品戶外、戶內腐蝕場所使用環境條件 | () |
| JB/T 5275-1991 | Y-W 系列及Y-WF系列 戶外及戶外化學防腐蝕型三相異步電動機 技術條件( 機座號80-315) | () |
| JB/T 5326-1991 | 儀表用金屬材料縫隙腐蝕試驗方法 | () |
| JB/T 5329.1-1991 | 儀表用耐腐蝕彈性合金 耐硫化物腐蝕OCr15Ni40MoCuTiA1B 彈性合金帶材 | () |
| JB/T 5329.2-1991 | 儀表用耐腐蝕彈性合金 耐鹽酸腐蝕OONi70Mo28V 彈性合金帶材 | () |
| JB/T 5329.3-1991 | 儀表用耐腐蝕彈性合金 耐氯化物腐蝕OOCr15Ni60Mo16W4彈性合金帶材 | () |
| JB/T 6073-1992 | 金屬覆蓋層 實驗室全浸腐蝕試驗 | () |
| JB/T 6074-1992 | 腐蝕試樣的制備、清洗和評定 | () |
| JB/T 7124-1993 | Y-F 系列防腐蝕型三相異步電動機 技術條件（機座號80-315） | () |
| JB/T 7576-1994 | 戶內外防腐蝕旋轉電機環境技術要求 | () |
| JB/T 7702-1995 | 金屬基體上金屬和非有機覆蓋層鹽水滴腐蝕試驗（SD試驗） | () |
| JB/T 7901-1999 | 金屬材料實驗室均勻腐蝕全浸試驗方法 | () |
| JB/T 8424-1996 | 金屬覆蓋層和有機涂層 天然海水腐蝕試驗方法 | () |
| JB/T 8427-1996 | 鋼結構腐蝕防護熱噴涂鋅、鋁及其合金涂層選擇與應用導則 | () |
| JB/T 9143-1999 | 緩蝕石棉填料腐蝕試驗方法 | () |
| JB/T 9237.1-1999 | 工業自動化儀表工作條件 腐蝕和侵蝕影響 | () |
| JB/T 9643-1999 | 防腐蝕型油浸式電力變壓器 | () |
| MT/T 335-1995(2005) | 單體液壓支柱 表面防腐蝕處理技術條件 | () |
| QB/T 1901.2-2006 | 表殼體及其附件 金合金覆蓋層 第2部分：純度、厚度、耐腐蝕性能和附著力的測試 | Watch-cases and accessories-Gold alloy coverings-Part 2:Determination of fineness,thickness,corrosion resistance and adhension |
| QB/T 3801-1999 | 化工用硬聚氯乙烯管材的腐蝕度試驗方法 | Test method of corrosion on the unplasticized polyvinyl chloride(PVC)pipes for chemical industry |
| QB/T 3825-1999 | 輕工產品鍍鋅白色鈍化膜的存在試驗及耐腐蝕試驗方法 | Testing method of the white chromatic conversion coatings existence and the corrosion resistance of the zinc deposits for the light industrial products |
| QB/T 3826-1999 | 輕工產品金屬鍍層和化學處理層的耐腐蝕試驗方法中性鹽霧試驗(NSS)法 | Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Neutral salt spraying test (NSS) |
| QB/T 3827-1999 | 輕工產品金屬鍍層和化學處理層的耐腐蝕試驗方法乙酸鹽霧試驗(ASS)法 | Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Acetic salt spraying test (ASS) |
| QB/T 3828-1999 | 輕工產品金屬鍍層和化學處理層的耐腐蝕試驗方法銅鹽加速乙酸鹽霧試驗(CASS)法 | Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Copper accelerated salt spraying test(CASS) |
| QB/T 3829-1999 | 輕工產品金屬鍍層和化學處理層的耐腐蝕試驗方法腐蝕膏試驗(CORR)法 | Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Corrodokote test (CORR) |
| QB/T 3830-1999 | 輕工產品金屬鍍層和化學處理層的耐腐蝕試驗方法二氧化硫試驗法 | Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Sulphur dioxide test |
| QB/T 3831-1999 | 輕工產品金屬鍍層和化學處理層的抗變色腐蝕試驗方法硫化氫試驗法 | Anti-color changecorrosion testingmethod of the metal deposits and conversion coatings for the light industrial products--Hydrogen sulfide test |
| QB/T 3832-1999 | 輕工產品金屬鍍層腐蝕試驗結果的評價 | Evaluation of the corrosion test results of the metal deposits for the light industrial products |
| QC/T 732-2005 | 乘用車強化腐蝕試驗方法 | Accelerated corrosion testing method for passenger car |
| SD 202-1986(2005) | 火力發電廠垢和腐蝕產物分析方法 | () |
| SH/T 0023-1990(2006年確認) | 噴氣燃料銀片腐蝕試驗法 | () |
| SH/T 0080-1991(2006年確認) | 防銹油脂腐蝕性試驗法 | () |
| SH/T 0085-1991（2000） | 發動機冷卻液腐蝕測定法（玻璃器皿法） | () |
| SH/T 0087-1991(2006年確認) | 發動機冷卻液鋁泵氣穴腐蝕特性試驗法 | () |
| SH/T 0088-1991(2006年確認) | 發動機冷卻液模擬使用腐蝕測定法 | () |
| SH/T 0208-1992(2003) | 航空液壓油熱氧化安定性及腐蝕測定法 | () |
| SH/T 0232-1992(2003) | 液化石油氣銅片腐蝕試驗法 | () |
| SH/T 0264-1999(2006年確認) | 內燃機油高溫氧化和軸瓦腐蝕評定法（皮特W-1法） | () |
| SH/T 0265-1992(2006年確認) | 內燃機油高溫氧化和軸瓦腐蝕評定法（L-38法） | () |
| SH/T 0304-1999(2005) | 電氣絕緣油腐蝕性硫試驗法 | () |
| SH/T 0331-1992(2003) | 潤滑脂腐蝕試驗法 | () |
| SH/T 0620-1995(2003) | 發動機冷卻液對傳熱狀態下的鑄鋁合金腐蝕測定法 | () |
| SH/T 0649-1997(2003) | 船用潤滑油腐蝕試驗法 | () |
| SH/T 0723-2002 | 柴油機油腐蝕性能評定法 | () |
| SH/T 0752-2005 | 含水難燃液壓液抗腐蝕性測定法 | () |
| SH/T 0754-2005 | 柴油機油在135℃下腐蝕性能評定法 | () |
| SH/T 0788-2006 | 內燃機油高溫氧化和軸瓦腐蝕評定法（程序Ⅷ法） | () |
| SH/T 0804-2007 | 電器絕緣油腐蝕性硫試驗 銀片試驗法 | Detection of corrosive sulfur of insulating oils-Siler strip test |
| SY 0007-1999 | 鋼質管道及儲罐腐蝕控制工程設計規范 | () |
| SY/T 0029-1998 | 埋地鋼質檢查片腐蝕速率測試方法 | () |
| SY/T 0078-1993 | 鋼質管道內腐蝕控制標準 | () |
| SY/T 0087.1-2006 | 鋼制管道及儲罐腐蝕評價標準 埋地鋼質管道外腐蝕直接評價 | Standard of steel pipeline and tank corrosion assessment steel pipeline external corrosion direct assessment |
| SY/T 0546-1996 | 腐蝕產物的采集與鑒定 | () |
| SY/T 0599-2006 | 天然氣地面設施抗硫化物應力開裂和抗應力腐蝕開裂的金屬材料要求 | Metallic material requirements-Resistance to sulfide stress cracking and stress corrosion cracking for gas surface equipment |
| SY/T 10008-2000 | 海上固定式鋼質石油生產平臺的腐蝕控制 | () |
| SY/T 10048-2003 | 腐蝕管道評估的推薦作法 | () |
| SY/T 4091-1995 | 灘海石油工程防腐蝕技術規范 | () |
| SY/T 546-1996 | 腐蝕產物的采集與鑒定 | () |
| SY/T 6151-1995 | 鋼質管道管體腐蝕損傷評價方法 | () |
| SY/T 6530-2002 | 非腐蝕性氣體輸送用管線管內涂層 | () |
| SY/T 6601-2004 | 耐腐蝕合金管線鋼管 | () |
| SY/T 6623-2005 | 內覆或襯里耐腐蝕合金復合鋼管規范 | () |
| SY/T 87-1995 | 鋼質管道及儲罐腐蝕與防護調查方法標準 | () |
| SYJ 30-1987 | 埋地鋼質管道及儲罐防腐蝕工程基本術語 | () |
| SYJ 30-87(2005) | 埋地鋼質管道及儲罐防腐蝕工程基本術語 | () |
| YB/T 5344-2006 | 鐵-鉻-鎳合金在高溫水中應力腐蝕試驗方法 | () |
| YB/T 5362-2006 | 不銹鋼在沸騰氯化鎂溶液中應力腐蝕試驗方法 | () |
| YBJ 215-1988 | YJ呋喃樹脂材料防腐蝕工程及驗收規程 | () |
| 編號 | 中文名稱 | 英文名稱 |
國外腐蝕監檢測標準一覽
ASTM TESTING CAPABILITIES | |
| A 262 | Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| A 763 | Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
| B 813 | Liquid and Paste Fluxes for Soldering Applications of Copper and Copper Alloy Tube |
| F 746 | Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| F 2129 | Conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small implant devices |
| G 5 | Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements |
| G 28 | Method for Detecting Susceptibility to Intergranular Attack in Wrought Nickel-Rich, Chromium-Bearing Alloys |
| G 31 | Practice for Laboratory Immersion Corrosion Testing of Metals |
| G 34 | Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
| G 35 | Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress Corrosion Cracking in Polythionic Acids |
| G 36 | Practice for Performing Stress-Corrosion Cracking Tests in a Boiling Magnesium Chloride Solution |
| G 37 | Practice for Use of Mattson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys |
| G 41 | Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
| G 44 | Practice for Alternate Immersion Stress Corrosion Testing in 3.5% Sodium Chloride Solution |
| G 47 | Test Method for Determining Susceptibility to Stress-Corrosion Cracking of High-Strength Aluminum Alloy Products |
| G 48 | Test Method for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by the Use of Ferric Chloride Solution |
| G 54 | Practice for Simple Static Oxidation Testing |
| G 59 | Practice for Conducting Potentiodynamic Polarization Resistance Measurements |
| G 61 | Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-. or Cobalt-Based Alloys |
| G 66 | Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| G 67 | Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| G 69 | Practice for Measurement of Corrosion Potentials of Aluminum Alloys |
| G 71 | Practice for Conducting and Evaluating Galvanic Corrosion Test in Electrolytes |
| G 75 | Test Method for Slurry Abrasivity by Miller Number and Slurry Abrasion Response of Materials (SAR Number) |
| G 78 | Guide for Crevice Corrosion Testing of Iron Base and Nickel Base Stainless Alloys in Sea water and Other Chloride-Containing Aqueous Environments |
| G 79 | Practice for Evaluation of Metals Exposed to Carburization Environments |
| G 97 | Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| G 103 | Method for Performing a Stress-Corrosion Cracking Test of Low Copper Containing Al-Zn-Mg Alloys in Boiling 6% Sodium Chloride Solution |
| G 108 | Test Method for Electrochemical Reactivation (EPEE) for Detecting Sensitization of AXIS Type 304 and 304L Stainless Steels |
| G 110 | Practice for Evaluating Intergranular Corrosion Resistance of Heat-Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution |
| G 123 | Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution |
| G 150 | Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels |
NACE TESTING CAPABILITIES | |
| TM 0169 | Laboratory Corrosion Testing of Metals |
| TM 0174 | Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials in Immersion Service |
| TM 0177 | Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in H2S Environments |
| TM 0284 | Evaluation of Pipeline Steels for Resistance to Stepwise Cracking |
| TM 0187 | Evaluating Elastomeric Materials in Sour Gas Environments |
| TM 0190 | Impressed Current Test Method for Laboratory Testing of Aluminum Anodes |
| TM 0193 | Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures below 93C (200F) |
| ADDITIONAL TEST METHODS | |
| SW846-1110 | Corrosivity Toward Steel (EPA test) |
| 49 CFR 173.137 | DOT Measurement of Metal Corrosion |
MTI TESTING CAPABILITIES |
| MTI- 1 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Corrosion in Selected Media |
| MTI- 2 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Crevice Corrosion in a Standard Ferric Chloride Solution |
| MTI- 3 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Stress-Corrosion Cracking in a Boiling Magnesium Chloride Solution |
| MTI- 4 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Crevice Corrosion in Sodium Chloride Solutions |
ISO TESTING CAPABILITIES | |
| 3651 Austenitic Stainless Steel | Determination of Resistance to Intergranular Corrosion - Part I: Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test) |
| 6509 Corrosion of Metals and Alloys | Determination of Dezincation Resistance of Brass |
| 7539-2 Corrosion of Metals and Alloys | Stress Corrosion Testing - Part 2: Preparation and Use of Bent Beam Specimens |
| 7539-3 Corrosion of Metals and Alloys | Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens |
| 7539-5 Corrosion of Metals and Alloys | Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens |
| 9400 Nickel-Based Alloys | Determination of Resistance to Intergranular Corrosion |
| 9591 Corrosion of Aluminum Alloys | Determination of Resistance to Stress Corrosion Cracking |
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
