進口大流量齒輪泵

進口大流量齒輪泵

• 質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！
• 價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！
• 交貨：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

： 
圖文 
：

產品介紹產品尺寸產品結構PDF下載訂貨流程服務承諾

英國GRIMM格林進口大流量齒輪泵 UK GRIMM Imported large flow gear pump

英國GRIMM格林進口大流量齒輪泵概述： 
          進口大流量齒輪泵適用于輸送不含固體顆粒和纖維，無腐蝕性，溫度不高于80℃，粘度為5×10^-6～1.5×10-3m2/s(5-1500cSt)的潤滑油或性質類似潤滑油的其他液體。
          進口大流量齒輪泵的應用范圍：在輸油系統中可用作傳輸、增壓泵；在燃油系統中可用作輸送、加壓、噴射的燃油泵；在一切工業領域中，均可作潤滑油泵用。

英國GRIMM格林進口大流量齒輪泵結構特點： 
         進口大流量齒輪泵主要由齒輪、軸、泵體、安全閥、軸端密封所組成。齒輪經熱處理有較高的硬度和強度，與軸一同安裝在可更換的軸套內運轉。泵內全部零件的潤滑均在泵工作時利用輸出介質而自動達到。泵內有設計合理的泄油和回油槽，是齒輪在工作中承受的扭矩力zui小，因此軸承負荷小，磨損小，泵效率高。

英國GRIMM格林進口大流量齒輪泵工作原理： 
           進口大流量齒輪泵設有安全閥作為超載保護，安全閥的全回流壓力為泵額定排除壓力的1.5倍，也可在允許排出壓力 范圍內根據實際需要另外調整。但注意本安全閥不能作減壓閥的*工作，需要時可在管路上另行安裝。從主軸外伸端向泵看，為順時針旋轉。

英國GRIMM格林進口大流量齒輪泵主要參數：
流              量：72-570m3/h
排  出  壓   力：0.6MPa
口              徑：150-350mm
必需汽蝕余量：7-8m
效              率：43-44%
轉              速：740-990r/min
功              率：37-250kw
電              壓：220/380V
材              質：鑄鐵、不銹鋼

英國GRIMM格林進口大流量齒輪泵適用范圍：

在輸油系統中可用作傳輸、增壓泵；

在燃油系統中可用作輸送、加壓、噴射的燃油泵；

在一切工業領域中，均可作潤滑油泵用。

UK GRIMM Imported large flow gear pump summary:

        Imported high flow gear pump for conveying solid particles and fiber, non corrosive, temperature is not higher than 80 DEG C, the viscosity is 5 * 10-6 to 1.5 * 10-3m2/s (5-1500cSt) and other liquid lubricating oil or lubricating oil of similar nature.

         The application range of imported high flow gear pump can be used as in the oil transfer system, can be used as a booster pump; fuel pump conveying, pressure, injection in the fuel system; in all industrial fields, can be used as a lubricating oil pump.

UK GRIMM Imported large flow gear pump structure characteristics:

        The imported large flow gear pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. The gear has higher hardness and strength after heat treatment, and it is installed with the shaft in the replaceable axle sleeve. The lubrication of all parts in the pump is automatically reached by using the output medium when the pump is working. The pump has reasonable design of the oil and the oil return groove is a gear in the work under minimum torque force, so the bearing load is small, small abrasion, high pump efficiency.

UK GRIMMImported large flow gear pump working principle:

        Imported large flow gear pump is equipped with safety valve as overload protection, the total return pressure of the safety valve is 1.5 times of the rated pressure of the pump, and also can be adjusted in the allowable discharge pressure range according to the actual needs. But note that the safety valve can not be used for long-term work of pressure reducing valve, when necessary, can be installed on the pipeline. From the spindle overhang to the pump, clockwise rotation.

UK GRIMM Imported large flow gear pump technical parameter:

Flow rate: 72-570m3/h

Discharge pressure: 0.6MPa

Caliber: 150-350mm

Required cavitation: 7-8m

Efficiency: 43-44%

Speed: 740-990r/min

Power: 37-250kw

Voltage: 220/380V

Material: cast iron, stainless steel

UK GRIMM Imported large flow gear pump scope of application:

In the oil transportation system, it can be used as a transmission and booster pump;

A fuel pump used in a fuel system for transportation, pressurization, and injection;

It can be used as lubricating oil pump in all industrial fields.

進口大流量齒輪泵?：http://www.021fmc。。ｃｎ/aspcms/product/2017-7-18/2726.html 

GRIMM中國：

      上海秉奇閥門有限公司為GRIMM公司在中國的總代理，是中國擁有GRIMM代理權及銷售權，主要為中國地區客戶提供服務與，同時，秉奇人員也積極參與總部技術培訓學習，并不斷掌握產品原理、實際運作、工程技術做為基石，完善對中國地區客戶需求。             

關于GRIMM：

             英國格林（GRIMM）有限公司是亞太地區流體控制領域的主要生產和供應商之一，公司總部位于克萊福德，擁有一支有經驗的研發隊伍，實行統一設計，統一標準，在水泵領域內處于地位。在許多個國家均有生產水泵基地，中國由上海秉奇閥門負責中國市場各項業務與中心，同時向中國市場銷售。

         英國格林（GRIMM）產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域，以及人們?nèi)粘Ｉ钪小?/span>

         英國格林（GRIMM）主要產品有：管道泵、離心泵、隔膜泵、磁力泵、真空泵、潛水泵、排污泵、計量泵、衛生級泵、羅茨風機等系列產品。

服務體系：

GRIMM品質：

    GRIMM公司注重產品質量及使用壽命，全部采用*制造技術和生產設備，并堅持不懈研發新產品，為確保不間斷的全過程質量控制，在生產過程中采用(SPC)過程控制和(TQM)全面質量管理；GRIMM的嚴格規范實現了不讓品質拖節，有效保障產品每個細節達到的性能指標。

GRIMM專業：

    掌握核心的流體控制技術，提供市場的產品、服務和解決方案，幫助用戶提高效率，帶來至關重要的基礎設施。

GRIMM服務：

    我們與用戶緊密合作，支持一系列系統使用技術和文件報告，提供售前、售中、售后服務和，有了您的信任與支持，我們將更完善、更高效提供水泵流體技術方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

About GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英國格林總代理商：上海秉奇閥門有限公司，咨詢：

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., Advisory:

Welcome new and old customers call negotiate!

Contacts：Huang Tianxiang

：

Phone: (同號）

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District