進口齒輪泵

進口齒輪泵

• 質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！
• 價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！
• 交貨：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

： 
圖文 
：

產品介紹產品尺寸產品結構PDF下載訂貨流程服務承諾

英國GRIMM格林進口齒輪泵 UK GRIMM Import gear pump

英國GRIMM格林進口齒輪泵概述： 
          進口齒輪泵系容積式泵，主、被動齒輪與泵體、左右泵蓋組成進油、出油二個封閉空間，當齒輪轉動時，進油腔的容積，由于嚙合齒不斷脫開，而由小變大形成真空，將液體吸入，有齒谷帶往油腔，而出油腔容積，由于嚙合齒的不斷進入嚙合而大變小，油液受壓縮而被排出,從而達到輸送油料的目的。

英國GRIMM格林進口齒輪泵結構特點： 
           進口齒輪泵主要由齒輪、軸、泵體、泵蓋、軸承套、軸端密封(特殊要求，可選用磁力驅動，零泄露結構)等組成。齒輪經氮化處理有較高的硬度和耐磨性。與軸一同安裝在可更換的軸套內運轉。泵內全部零件的潤滑均在泵工作時利用輸送介質而自動達到。
　　    泵內四個軸承套在泵內浮動安裝，隨工作壓力大小自動調整端面間隙，因此泵的壓力穩定，輸出流量脈動小，溶積效率高。
　　    從主軸外伸端向泵看，為順時針旋轉。

英國GRIMM格林進口齒輪泵主要參數：
流              量：1.08-12m3/h
排  出  壓   力：2.5MPa
口              徑：20-50mm
必需汽蝕余量：9.5m
效              率：58-63%
轉              速：1420-1460r/min
功              率：2.2-15kw
電              壓：220/380V
材              質：鑄鐵、不銹鋼

英國GRIMM格林進口齒輪泵適用范圍：
        進口齒輪泵適用于輸送不含固體顆粒和纖維，無腐蝕性，溫度不高于80℃，粘度為5×10^-6～1.5×10-3m2/s（5-1500cSt)的潤滑油或性質類似潤滑油的其他液體以及用于液壓轉動系統。

英國GRIMM格林進口齒輪泵性能應用領域：
在輸油系統中可用作傳輸，增壓泵；
在燃油系統中可用作輸送、加壓、噴射的燃油泵；
在液壓傳動系統中可用作提供液壓動力的液壓泵；
在一切工業領域中，均可作潤滑油泵用。

UK GRIMM Import gear pump summary:

        The import volume pump gear pump system, active and passive gear and the pump body, pump cover composition into the oil, oil two closed space, when the gear rotates, the volume into the oil chamber, the gear continuously disengaged, and from small to large to form a vacuum, sucking the liquid, a tooth to the oil cavity and the oil cavity volume, the meshing teeth meshing and continue to enter into small, oil is compressed and discharged, so as to achieve the purpose of conveying oil.

UK GRIMM Import gear pump structure characteristics:

       Imported gear pump mainly by gear, shaft, pump body, pump cover, bearing sleeve, shaft end seal (special requirements, can use magnetic drive, zero leakage structure) and other components. The gears are treated by nitriding for higher hardness and wear resistance. The shaft is mounted in a replaceable axle sleeve. The lubrication of all parts in the pump is automatically reached when the pump is working.

        Pump four bearings in the pump floating installation, with the size of the work pressure automatically adjust the end clearance, so the pressure of the pump is stable, the output flow of small fluctuations, high deposition efficiency.

        From the spindle overhang to the pump, clockwise rotation.

UK GRIMM Import gear pump technical parameter:

Flow rate: 1.08-12m3/h

Discharge pressure: 2.5MPa

Caliber: 20-50mm

Required cavitation: 9.5m

Efficiency: 58-63%

Speed: 1420-1460r/min

Power: 2.2-15kw

Voltage: 220/380V

Material: cast iron, stainless steel

UK GRIMM Import gear pump scope of application:

       The imported gear pump for conveying solid particles and fiber, non corrosive, temperature is not higher than 80 DEG C, the viscosity is 5 * 10-6 to 1.5 * 10-3m2/s (5-1500cSt) and other liquid lubricating oil or lubricating oil and properties similar to those used in hydraulic rotation system.

UK GRIMM Import gear pump application area:

It can be used as a booster pump in the oil transportation system;

A fuel pump used in a fuel system for transportation, pressurization, and injection;

A hydraulic pump used to provide hydraulic power in a hydraulic transmission system;

It can be used as lubricating oil pump in all industrial fields.

進口齒輪泵?：http://www.021fmc。。ｃｎ/aspcms/product/2017-7-18/2725.html 

GRIMM中國：

      上海秉奇閥門有限公司為GRIMM公司在中國的總代理，是中國擁有GRIMM代理權及銷售權，主要為中國地區客戶提供服務與，同時，秉奇人員也積極參與總部技術培訓學習，并不斷掌握產品原理、實際運作、工程技術做為基石，完善對中國地區客戶需求。             

關于GRIMM：

             英國格林（GRIMM）有限公司是亞太地區流體控制領域的主要生產和供應商之一，公司總部位于克萊福德，擁有一支有經驗的研發隊伍，實行統一設計，統一標準，在水泵領域內處于地位。在許多個國家均有生產水泵基地，中國由上海秉奇閥門負責中國市場各項業務與中心，同時向中國市場銷售。

         英國格林（GRIMM）產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域，以及人們?nèi)粘Ｉ钪小?/span>

         英國格林（GRIMM）主要產品有：管道泵、離心泵、隔膜泵、磁力泵、真空泵、潛水泵、排污泵、計量泵、衛生級泵、羅茨風機等系列產品。

服務體系：

GRIMM品質：

    GRIMM公司注重產品質量及使用壽命，全部采用*制造技術和生產設備，并堅持不懈研發新產品，為確保不間斷的全過程質量控制，在生產過程中采用(SPC)過程控制和(TQM)全面質量管理；GRIMM的嚴格規范實現了不讓品質拖節，有效保障產品每個細節達到的性能指標。

GRIMM專業：

    掌握核心的流體控制技術，提供市場的產品、服務和解決方案，幫助用戶提高效率，帶來至關重要的基礎設施。

GRIMM服務：

    我們與用戶緊密合作，支持一系列系統使用技術和文件報告，提供售前、售中、售后服務和，有了您的信任與支持，我們將更完善、更高效提供水泵流體技術方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

About GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英國格林總代理商：上海秉奇閥門有限公司，咨詢：

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., Advisory:

Welcome new and old customers call negotiate!

Contacts：Huang Tianxiang

：

Phone: (同號）

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District