本目錄是上海蘇特電氣有限公司為您精心選購的：
防爆接線盒 |電源接線盒|尾端接線盒|隔爆接線盒|三通接線盒|二通接線盒
防爆接線盒| Explosion Proof Junction Box |
|
| 1.防爆接線盒 |電源接線盒|尾端接線盒|隔爆接線盒|三通接線盒|二通接線盒產品簡介 |
| | Brief Introduction of Product |
- 增安型防爆接線盒符合GB83836.3-2000的防爆規定，在II類1區和2區防爆場所供并聯帶安裝用。
Incremental safety explosion proof junction box complies with the requirements specified in G83836.3-2000.This is applied in Zone 2, Grade II, for parallel connection cable purpose. |
- 隔爆型防爆接線盒符合GB83836.2-2000的防爆規定，在II類1區和2區防爆場所供串聯帶安裝用。
Flameproof enclosure junction box complies with the requirements specified in G83836.3-2000. This is applied in Zone 1,2, Grade II, for series connection cable purpose. |
|
| Product Technical Parameters |
| 名稱 | 電源接線盒 | 二通接線盒 | 三通接線盒 | 終端接
線盒 | 熱電阻
接線盒| Thermal resistance Junction Box |
| 隔爆型接線盒| Flameproof Enclisure Junction Box |
| | 項目 | | 型號 | BHR81A-
15D/3 | BHR81A-
15Z/2 | BHR81A-
15Z/3 | BHR81A-
15F/1 | BHR81-
15R/3 | BHR85-
60 | | 額定電壓 | 220V/380V | 220V-660V | | 額定電流 | 15A | 60A | | 絕緣電阻 | ≥50MΩ | ≥50MΩ | | 防護等級 | 1P56 | IP56 | | 外形尺寸 | 178*60*57 | 135*60*35 | 135*77*35 | 45*20*51 | 178*60*57 | 230*190*120 | | 防爆標志 | ExeIIBT4 | | 用途 | 電源電纜與并
聯帶的連接
Connection between powercable and parallel connection cable |
| 兩根并聯帶
之間的連接
Connection between two parallel connection cables |
| 三根并聯帶
之間的連接
Connection between three parallel connection cables |
| 并聯帶的
尾端密封
End sealing of parallel connection cables |
| 熱電阻與控
制電纜連接
Connection between thermalresist-
ance and con-
trol cable |
| 串聯帶與電纜
/串聯帶連接
和尾端密封connection between series cables and power cables, series cables/connec-tion and End Sealing |
|
| Installing Sketch of Explosion proof Junction Box for Paralles connection cable |
| Points to Be Noticed for Product Installation |
| | （1）發現接線盒外殼有變形、裂痕和損壞、應停止使用。 | | | Where there is distortion,crack or damage on the junction box,it must be stopped using. | | | （2）安裝時應防止電熱絲和外編織銅絲及芯線之間的短路。 | | | When installing,avoid any short circuits between electric heating wires, braided copper wires and core wires. | | | （3）應按電熱帶的型號選用所附適當?shù)拿芊馊Α?/td> | | | Choose proper sealing rings according to the types of electric heating cables |
|
：徐壽平
： ，56479692 ，56480492
： ， ，
地址：上海市寶山區富長路1080弄357號
: sute@56412027.com sute@sutedq.com
公司：www.sute2008.com www.aft18.com
: :
您好, 歡迎來到化工儀器網
