化工儀器網
技術文章
Omni測量應用案例-2016-18
閱讀：341 發布時間：2016-5-26文獻名： Preparation and adsorption behaviour of cationic nanoparticles for sugarcane fibre modification
作者： Yuanfeng Pan,a Zhengdong Zhang,a Yang Li,a Pingxiong Cai,a Zhangfa Tong,a Xiaobang Houb and Huining Xiaoc
a Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China
b School of Environmental Sci & Eng., North China Electric Power University, Baoding 071003, China
c Department of Chemical Engineering, University of New Brunswick, Fredericton, E3B 3 Canada
摘要：Cationic nanoparticles with a core–shell structure and high zeta potential were prepared by two-step semi-batch emulsion polymerization and pre-emulsification technology using the cationic emulsifier hexadecyl trimethyl ammonium chloride (CTAC). The core–shell structure of the latex particles was confirmed by the TEM image and the change of mean particle size. Various influencing factors related to the adsorption of cationic latex on sugarcane fibres were investigated, including the time of adsorption, the concentration of latex, pH, temperature and ionic strength. The adsorption kinetics and thermodynamics were also studied. The obtained adsorption experimental data fit the Langmuir adsorption model well, and the maximum theoretical adsorption capacity of the nanoparticles on the sugarcane fibres reached 197.6 mg g−1. TGA analysis was used to further quantify the amount of adsorption. The water contact angle of the modified fibre was increased from 0° to 98°, compared with the untreated fibre, which indicates that the sugarcane fibres were rendered hydrophobic by the cationic nanoparticles.